Decon wheel XLT 2008 Dynamic 조립 지침

{카테고리_이름} Decon wheel XLT 2008 Dynamic에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Decon wheel XLT 2008 Dynamic 3 페이지.

Assembly instructions for XLT 2008 Active, Dynamic, Swing

1. Remove wheel and hub sleeve on both sides.

2. Check the correct placement for the eMove, and that it is axle Ø12,0 x 51 with

Part Number: XOE-2530-BO and Spacer with Part Number: XOE-25383-00 and Stop

pins are assembled with Part Numbers: 290000, 300001 and XSM8ML.

MEM6087P and MEM6088P

2020-05-15