Green Lighting GL4689LU 조립 및 피팅 지침 - 페이지 4

{카테고리_이름} Green Lighting GL4689LU에 대한 조립 및 피팅 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Lighting GL4689LU 6 페이지. P-lux3 led tri-sensor lantern

INSTALLATION - continued

2. Use the backplate as a template

and insert masonry plugs so they

3. Pierce a hole in the grommet and

push the mains cable through allowing

enough cable for connection to the

terminal block (FIGURE 2).

4. Fix the blackplate to the mounting

(FIGURE 2).

FIGURE 3

5. Connect the mains supply cable to the terminal block using the following

colour code for the wiring (FIGURE 3):

Connect the wire coloured Brown or Red (Live) to the corresponding Brown

wire in the terminal block, or the terminal marked L.

Connect the wire coloured Green/Yellow or Green (Earth) to the corresponding

Green/Yellow wire in the terminal block, or the terminal marked E or

Connect the wire coloured Blue or Black (Neutral) to the corresponding

Blue wire in the terminal block, or the terminal marked N.

Clip the terminal block on the junction box.

REMEMBER: THIS FITTING MUST BE EARTHED.

(FIGURE 2).

P-LUX UNIT

FIGURE 2

3 X2