Green Lighting GL-ML28P/BLK 사용 설명서 - 페이지 5

{카테고리_이름} Green Lighting GL-ML28P/BLK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Lighting GL-ML28P/BLK 8 페이지. 28w 2300lm led security floodlight with pir

페이지 인쇄

7. Setting the Light's Functions

The light has the following controls (Fig 6).

• F

(Lux) - controls the lux/ambient light level at which the light and PIR operate.

• T

(Time) - controls the time duration the light turns on when triggered.

• R

(Range) - controls the range and sensitivity of the PIR.

See below for instructions on setting the different controls.

7.1 Setting the Lux (Ambient Light Level)

The Lux setting (F) determines the light level at which the light and PIR operate.

• At level 1 it operates in maximum darkness.

• At level 5 it operates in daylight.

7.2 Setting the Time Duration

Turn up the Time Duration control (T) to increase the duration of the light.

• The duration can be set from approximately 5 seconds to 5 minutes.

• If a moving heat source is detected, the sensor is triggered, switching on the light and

starting the countdown to time-out according to the pre-set Time period. If the sensor

is triggered again, the light remains on for the pre-set duration starting from the last

trigger.

• The ideal On time for general domestic situations is 2 - 3 minutes.

7.2 Setting the Range

The Range sensitivity of the PIR (R) is affected by the range of detection and the amount

of infrared radiation (heat) required to trigger the sensor.

• The Range sensitivity adjustment can also be use to compensate for the changes in

outside air temperature in winter and summer.

• To be effective, yet minimise nuisance triggering, it is advisable to turn the

Range control to the middle position where the ambient air temperature is between

15 - 20ºC.

www.greenlighting.co.uk

• 5 •

Fig 6.