HIKVISION H1T Series 사용자 설명서 - 페이지 6

{카테고리_이름} HIKVISION H1T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION H1T Series 15 페이지. Turbo hd dome camera
HIKVISION H1T Series에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (14 페이지)

페이지 인쇄
HIKVISION H1T Series 사용자 설명서
 Make sure that all the related equipment is power-off
during the installation.
 Check the specification of the products for the
installation environment.
 Check whether the power supply is matched with
your power output to avoid the damage.
 Make sure the wall is strong enough to withstand
three times the weight of the camera and the
bracket.
 If the wall is cement, you need to insert expansion
bolts before you install the camera. If the wall is
wooden, you can use self-tapping screws to secure
the camera.
 If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance
by yourself.

2.1 Ceiling Mounting

Note:
Both wall mounting and ceiling mounting are suitable
for the bullet camera. Ceiling mounting will be taken as
an example in this section. And you can take steps of
ceiling mounting as a reference for wall mounting.
Steps:
1. Paste the drill template to the celling.
2. Drill screw holes and the cable hole (optional) on
the ceiling according to the supplied drill template.
Note:
Drill the cable hole when adopting the ceiling outlet to
route the cable.
Type I Camera
3. Loosen the screws on the bubble of the dome
camera to remove the bubble and the black liner.
4. Attach the back box of type I camera/base plate of
type II camera to the ceiling and secure them with
supplied screws.
Type I Camera
Figure 2-2 Attach the Back Box/Base Plate
Figure 2-1 The Drill Template
Type II Camera
Type II Camera