IKEA 003.923.24 조립 지침 매뉴얼 - 페이지 11

{카테고리_이름} IKEA 003.923.24에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA 003.923.24 20 페이지.

페이지 인쇄

ENGLISH

What to do if...

If there is a fault, first try to find a solution

to the problem yourself. If you cannot find a

solution to the problem yourself, contact an

authorized service center.

PROBLEM

Appliance not stable

Appliance is not in horizontal

position

Performance in terms of oil cap-

ture are not satisfying

Appliance does not work

The light does not work

Noise of hood is higher than

customer expectation.

Before contacting the Authorized Service Centre:

Switch the appliance on again to see if the problem has disappeared. If not, switch it off

again and repeat the operation after an hour.

If your appliance still does not work properly after carrying out the checks listed in the trou-

bleshooting guide and switching the appliance on again, contact the Authorized Service

Centre, clearly explaining the problem and specifying:

• the type of fault;

• the model;

• the type and serial number of the appliance (given on the rating plate).

POSSIBLE CAUSE

The appliance is not correctly installed Follow the Installation instruction

Oil and grease on metal filters or

charcoal filters.

The appliance is not correctly con-

nected

The LED is broken

Air outlet diameter in the wall is too

small, causing a pressure drop and

an increase in motor speed.

Product is installed in recirculation

mode.

More than one bend in the ventila-

tion duct.

If you operated the appliance wrongly,

or the installation was not carried out

according to the Assembly instructions, the

visit from the Authorized Service Centre

technician may not take place free of

charge, even during the warranty period.

SOLUTION

enclosed to the appliance.

Follow the cleaning frequency of filters

as described in the user manual

Verify that the main cable is connected

to the motor group or the plug is con-

nected to the socket

You can replace the lamp without con-

tact the Authorized Service Centre.

Follow the Installation instruction

enclosed to the appliance.

Product in recirculation mode(and

using a charcoal filter) will generate an

higher noise than a product in extra-

tion mode.

If the exhaust system in the build-

ing has multiple bend in or a long

distance, this can increase the noise of

the product.