Ganz DAY/NIGHT VANDAL DOME CAMERA 사용 설명서 - 페이지 2
{카테고리_이름} Ganz DAY/NIGHT VANDAL DOME CAMERA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ganz DAY/NIGHT VANDAL DOME CAMERA 4 페이지. Day/night vandal dome camera
페이지 인쇄CONNECTIONS AND CAMERA SETTINGS
■ LENS ADJUSTMENTS
1. Adjust the panning(360˚) and tilt(70˚) position.
2. Setting the zoom position by using Zoom Lever Screw.
3. Setting the focus by using Focus Lever Screw.
■ CAMERA SETTINGS
● OSD SWITCH FUNCTION
SETUP
FUNTION
LENS
MANUAL, DC
SHUTTER
ESC, MANUAL, FLK
WHITE BAL.
ATW, AWC, MANUAL
BACKLIGHT
OFF, LOW, MIDDLE, HIGH
AGC
OFF, NORMAL, HIGH
DNR
OFF, LOW, MIDDLE, HIGH
SENS-UP
OFF, AUTO
SPECIAL
Refer to the bottom
EXIT
SPECIAL
FUNTION
CAMER ID
uppercase or lowercase,
/numeral 0~9/-, null
COLOR → AUTO → B/W
DAY / NIGHT
SYNC
INT, LL
MATION
OFF, ON
DETECTION
PRIVACY
OFF, ON
MIRROR
OFF, ON
SHARPNESS
OFF, ON
RESET
RERURN
SUMMARY
when using BUILT-IN lens,
the type of the lens is able to fix
MANUAL: 1/60(50) ~ 1/120,000sec
ATW: 1,800 ~10,500 ˚ K
Backlight compensation
the Brightness can be adjusted(1 ~ 70)
when AGC is turned off, DNR does not
operate.
when AGC is turned off, SENS-UP
does not operate.
Saved all the setting menu, then exits.
SUMMARY
maximum length for the name
display is limited 15letters.
AUTO : night time → B/W mode
day time → color mode ,
B/W
: Always B/W mode
COLOR : Always color mode
LL mode: you can adjust desired phase
from 0 ˚ ~ 359 ˚ , auto detection
ON mode: AREA(4 programmable zone)
the word "MOTION DETECTED" appear
on the screen when movement is detected
ON mode:AREA(4 programmable zone ),
/SIZE/TONE
set a horizontal image inversion.
the available range of level is 0 ~ 31.
returns to the level which was set
by the manufacturer for shipment.
save the SPECIAL MENU and then
returns to the SETUP MENU