Ganz Lite LDB series 사용자 설명서
{카테고리_이름} Ganz Lite LDB series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ganz Lite LDB series 2 페이지. 600 tvl day / night color camera
페이지 인쇄GANZ Lite LDB series
Color Camera
Emissions
FCC part 15 Class B
CE: EN55011
ICES-003
EN55022
CISPR 11
CISPR22
ANSI C63.4
Immunity
CE: EN50130-4
FCC COMPLIANCE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against armful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced Radio/TV technician for help.
CISPR 22 WARNING:
This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
POWER SUPPLY REQUIREMENTS:
For use with listed Audio/Video product and only connected to 15W or less power supply.
*Power supply should be a NEC Class 2 / LPS Supply.
EQUIPMENT MODIFICATION CAUTION:
Equipment changes or modifications not expressly approved by seller.
The party responsible for FCC compliance could void the user's authority to operate the equipment and could create a
hazardous condition.
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
without prior notice.
•
Quick install adaptor x 1
•
Torx driver x 1
•
D5 fixing screws x 3
•
T6 fixing screw (for T6 fixing screw) x 1
•
Wall plugs x 3
•
Power lead x 1
•
Cable entry sealing plug
(1/2", for quick install adaptor use) x 1
•
Cable entry sealing plug
(3/4" ,for dome base use) x 1
General Specifications
TV System
NTSC
Image Sensor
1/3" Interline CCD Sensor
Effective Picture Element
768(H)x494(V)
Scanning Frequency
H:15734Hz V:59.9Hz
Resolution
Min. Illumination
0.32 Lux (50 IRE, F=1.2, ACG Max)
S/N Ratio
Video Output
1.0Vpp 75Ω BNC unbalanced
Power Source
Power Consumption
Operating Temperature
Storage Temperature
Functional Specifications
Lens Control
Auto / Manual
Backlight Compensation
2 Zones On, Off, HLC
AGC Control
Low / Middle / High / Off
Digital Noise Reduction
ATW 1(2700~9700K) / ATW2 (2000K~20000K),
White Balance Control
AWC / MANUAL
RoHS
Standard Range
2700k~9700k
AWB
EX Range
2000k~20000k
Sharpness
Level 1-31
Day & Night
Auto/ Adjustable
MES 1/60, FLK,
Shutter Function
1/250~1/100000, Auto
Privacy Zone
8 Zones On/Off
Mirror
Motion Detection
4 Zones On/Off
WDR Preference
Focal Length
3~9mm
F-No.
F1.2
Iris Range
F1.2~F360
Minimum Object Distance
0.5m
Diagonal
116.2º~39.7º
Field Of View
Horizontal
90.0º~31.8º
Vertical
66.2º~23.9º
V531-DF016-C03
Ver.09/2012
PAL
752(H)x582(V)
2:1 Interlace
H:15625Hz V:50.0Hz
C
600TV Line
＞50dB
D
12VDC ±10%
1.7 W Max
-10°C~+50°C
-20°C~+60°C
On / Off
service jack, alternatively.
MES 1/50, FLK,
1/250~1/100000, Auto
On / Off
On / Off
Camera Adjustments and Programming
In addition to the levelers for Focus (A) and Field of View (B),
4~9mm
all settings are made by keys on the OSD control bank. Alternatively, you may connect
F1.6
to an external OSD menu control board.
F1.6~F360
0.5m
Depending on the application, it may be required to set the unit for the proper video
92.8º~39.4º
standard. Please refer to Camera OSD Menu for required adjustment.
71.0º~31.6º
51.6º~23.6º
1. With power applied to the camera and a video monitor connected, press and hold
the MENU key for three seconds to access the top level menu. A map of the menu
options are shown in the following Camera OSD Menu.
2. Use the arrow keys on the control board to navigate around the OSD menu and use the
MENU key to confirm your selections. Once all the desired settings have been made,
confirm the changes be selecting SAVE and pressing the MENU key, otherwise any changes
made will be lost when the camera is next reset or has its power cycled.
3. To quit the exit the OSD menu without making any changes, select CANCEL
and press the MENU key.
4. If required, the camera can be reset to factory defaults by selecting
DEFAULT in the OSD menu.
Auto
Day/Night
A: Focus Adjuster
Color
B: Field of View Adjuster
C: Service Jack Socket
B/W
A
D: Service Board Control
EXT
B
Exposure
Shutter
Brightness
AGC
DWDR
DC
Lens
Video (Only for CR)
Manual
ATW1
White balance
ATW2
AWC--Set
Manual
Backlight
Off
BLC
HLC
Image Adj.
Lens Shad.
UP
2DNR
Mirror
Font Color
Contrast
Sharpness
Display
LEFT
RIGHT
DOWN
Special
Cam title
Motion
Privacy
DPC
Language
Version
Return
Reset
EXIT
D/N Level
D/N Delay
N/D Level
N/N Delay
IR Gain
Return
Height
Burst
Off/On
Width
IR Smart
Off/On
On
Left/Right
IR Level
High/Low
Top/Bottom
Return
Return
1/50, FLK, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/5000, 1/10000, 1/100000, AUTO
Off/Low/Middle/High
Off
On
Level
Return
Ret/End
Color Temp
Manual/Indoor/Outdoor
Blue
Red
Area Sel.
Area 1~2
Return
Ret/End
Area State
Off/On
Gain
Height
Width
Level
Left/Right
Mode
All Day/ Night Only
Top/Bottom
Return Ret/End
Return
Ret/End
Off/On
On
Level
Return Ret/End
Off/On
Off/On
Font
ID & Title
Return
Ret/End
CRT
Ped Level
Color Gain
Return
Ret/End
LCD
Gamma
Ped Level
Color Gain
Return
Ret/End
User
Gamma
Ped Level
Color Gain
Return
Ret/End
Neg. Image
Off/On
Return
Ret/End
On
Off/On
input 0~9/A~Z etc.
CLR/Pos/End
Area Sel.
Area 1~4
Off/On
On
Area State
Off/On
Height
Width
Off/On
On
Left/Right
Top/Bottom
Degree
English/
中文
View
Off/On
Return
Ret/End
Ret/End
Area Sel.
Area 1~8
Area State
Off/On
Height
Factory Reset
Width
Left/Right
Return
Ret/End
Top/Bottom
Color
Return
Ret/End