HIKVISION HiLook THC-T129-LPS 사용자 설명서 - 페이지 11
{카테고리_이름} HIKVISION HiLook THC-T129-LPS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION HiLook THC-T129-LPS 17 페이지. Smart hybrid light bullet & turret camera
페이지 인쇄
3. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
4. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
5. Secure the junction box body on the ceiling with three
or four PA4 × 25 screws according to the actual object.
6. Fix the camera to the junction box.
For Type III camera:
For Type IV camera:
PM4
Installation Plate
Figure 2-8 Fix the Camera to the Junction Box Cover
Figure 2-9 Fix the Junction Box Cover and Junction Box
7. Route the cables through the bottom cable hole or
the side cable hole of the junction box.
8. Refer to step 5 of 2.2.1 Ceiling Mounting without
Junction Box to adjust the angle and finish the
installation.
2.2.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill Ø10 mm screw holes in the wall where you want
to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
3. Use three PM4 screws to fix the installation plate onto
the wall mount.
Figure 2-10 Fix the Wall Mount
Body