KitchenAid KGCT366E 사용 및 관리 매뉴얼 - 페이지 10
{카테고리_이름} KitchenAid KGCT366E에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KGCT366E 14 페이지. 36" glass sealed-burner gas cooktop
페이지 인쇄REMOVING A SURFACE BURNER & SPARK IGNITOR
Tools Required:
1/4 " Nut Driver
1/2 " Open End Wrench
3/8 " Open End Wrench
1.
Turn off the gas and the electrical supply to the cooktop.
2.
Remove the gas regulator and remove the cooktop from the cabinet.
3.
Turn the cooktop over and remove the burner box cover (see page 3).
Refer to the illustration on the next page.
4.
Disconnect the spark ignitor wire from the pin for the surface burner you wish to
service.
5.
Disconnect the gas line fitting from the surface burner that you wish to remove, and
remove the hex-head screw from the surface burner bracket , then remove the burner
and mounting plate from the cooktop glass.
6.
Unclip the spark ignitor and remove it from the surface burner, then remove the three
hex-nuts from the surface burner and remove it from the plate.
7.
Reassemble the unit.
- 6 -