KitchenAid KGCT366EBL 사용 및 관리 매뉴얼 - 페이지 9
{카테고리_이름} KitchenAid KGCT366EBL에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KGCT366EBL 14 페이지. 36" glass sealed-burner gas cooktop
페이지 인쇄REMOVING THE SPARK MODULE
Tools Required:
1/4 " Nut Driver
1.
Turn off the gas and the electrical supply to the cooktop.
2.
Remove the gas regulator and remove the cooktop from the cabinet.
3.
Turn the cooktop over and remove the burner box cover (see page 3).
4.
Remove the three screws from the spark module and remove it, then mount the new
module in its place.
5.
Disconnect the wires from the terminals of the old spark module and reconnect them
to the same terminal locations on the new module.
6.
Reassemble the unit.
Brown
Module Screws
Blue
Yellow
Orange
SPARK MODULE
- 5 -
Ground Screw
Green
Red
Brown
(Common)