IKEA BEJUBLAD 매뉴얼 - 페이지 7
{카테고리_이름} IKEA BEJUBLAD에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA BEJUBLAD 20 페이지. Ikea oven
IKEA BEJUBLAD에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지), 매뉴얼 (24 페이지), 매뉴얼 (48 페이지), 매뉴얼 (16 페이지), 사용 설명서 (36 페이지), 매뉴얼 (8 페이지), 매뉴얼 (41 페이지), 매뉴얼 (32 페이지), 사용 설명서 (24 페이지)
페이지 인쇄
ENGLISH
Care and cleaning
• Grease filters must be cleaned every
2 months of operation, or more
frequently for particularly heavy
usage, and can be washed in a
dishwasher.
• Clean the hood using a damp cloth
and a neutral liquid detergent.
Care and cleaning long life Charcoal
filter (Green)
• The anti-odour lter can be washed
and regenerated every 3-4 months
(or more frequently if the hood is
subject to intensive use), up to a
Max. of 8 regeneration cycles (in
case of particularly intensive use it
is recommended that you do not
exceed 5 cycles).
Regeneration procedure:
• Wash in the dishwasher at a MAX
temperature of 70° or hand wash in hot
water without using abrasive sponges
(do not use detergents!).
• Dry in the oven at a MAX temperature
of 70° for 2 hours (it is recommended to
read carefully the user manual and the
assembly instruction of the oven of your
own).
Installation modes
The hood has been designed to be installed
and used either as a "Exhausted model", or
as a "Recirculation model".
Exhausted model (see symbol
installation booklet)
Cooking steam is sucked and channelled
outside the house through a discharge duct
(not supplied), fitted to the hood steam out-
let.
Ensure that the discharge duct is correctly
fitted to the air outlet, unit using an appro-
priate connection system.
Important: if already installed, remove the
charcoal filter/s.
Recirculation model (see symbol
in installation booklet)
The air is filtered through one or more the
charcoal filters, and then resent into room.
Important: Ensure appropriate air circula-
tion around the hood.
Important: If the hood is supplied without
charcoal filters and installed on recirculation
mode, these must be fitted before the hood
can be used. Filters are available in shops.
The hood should be installed away from
particularly dirty areas, windows, doors and
heat sources.
The accessories for wall fixing are not in-
cluded because wall made of different ma-
terials require different types of fixing ac-
cessories. Use fixing systems suitable for
the walls of your home and the weight of
the appliance. For more details, contact a
specialized dealer.
min 471 mm
max 861 mm
Keep this booklet for future consultation.
in
min 471 mm
min 569 mm
max 861 mm
max 861 mm
min 471 mm
max 861 mm
min 569 mm
max 861 mm
min 471 mm
max 861 mm
7
min 569 mm
max 861 mm