CeoTronics CT-DECT Base 사용 설명서 - 페이지 15

{카테고리_이름} CeoTronics CT-DECT Base에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CeoTronics CT-DECT Base 20 페이지. Headset for wireless duplex communication
CeoTronics CT-DECT Base에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 사용 설명서 (14 페이지), 사용 설명서 (14 페이지), 사용 설명서 (20 페이지)

페이지 인쇄

English

12.

On-air subscription

Base headset and standard headset(s) can also be used in conjunction with other CT-DECT

devices resp. CT-GateCom devices. The on-air subscription of a headset to one of these devices

is carried out analogous and in the sequence as described in sections 12.3....12.3.2. Going to do

so, first ascertain which of the devices is the base device and which a standard device.

For on-air subscription at a DECT device or at a CT-GateCom device always the on/off switch

and the subscription button(s) are used.

In every case notice the special CeoTronics operating instructions for the other CT-DECT device

resp. CT-GateCom device.

12.1 General

NOTE

The on-air subscription is a procedure which has to be performed once by the factory. It must

be performed again only in the case a headset that isn't subscribed to the system has to be

used within the system.

Each headset has its own internal identification number. First of all an allocation must always take place

between the base headset and the maximum of four standard headsets. This subscription procedure,

which has to be performed once only, is performed on the base headset and the maximum of two

standard headsets manually by means of a procedure carried out by the operator.

After the subscription procedure has been successfully concluded, the identity of the communication

partner is stored in the data base of the headset. The standard headset stores one base headset. The

base headset stores the last two successfully subscribed standard headsets.