BRITAX RÖMER DUALFIX PRO 사용자 설명서 - 페이지 14

{카테고리_이름} BRITAX RÖMER DUALFIX PRO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. BRITAX RÖMER DUALFIX PRO 19 페이지.

페이지 인쇄

6.1.2

Remove cover from the headrest

Headrest

Rubber loops

Harness buckle

Adjustment button

1. To loosen the belt, press the adjustment button 4 and

pull both shoulder straps 6 forwards at the same time.

The shoulder pads are not connected to the shoul-

der straps. If you pull on the shoulder pads, the

belt is not loosened. Only pull on the shoulder

straps.

2. Open the harness buckle 3 by pressing the red button.

3. Adjust the headrest 1 to the highest position (see "Ad-

just headrest", page 5).

4. Loosen the rubber loops 2 on the bottom edge of the

headrest.

5. Remove the hooks 7 at the top edge of the headrest.

6. Remove the cover.

IP10165 | 1.5 | 2000038331

Shoulder pads

Shoulder strap

Hooks

DUALFIX PRO | BRITAX RÖMER

6.1.3

Remove cover from the seat

Headrest

Push-buttons

Velcro

1. Adjust the seat to the flattest position (see "Adjusting

the seat angle", page 6).

2. Adjust the headrest 1 to the lowest position (see "Ad-

just headrest", page 5).

3. Open the pushbuttons 2 on the left and right of the

backrest.

4. Undo the Velcro 3 on the padded crotch.

5. In the leg area, remove the rubber loops 4 and the

plastic cards 5.

6. Remove the elastic seam of the cover from the edge of

the seat.

7. Thread the shoulder straps through the cutout.

8. Pull the cover from the child seat from bottom to top.

6.1.4

Clean cover

Damage to important parts

Before washing the seat reducer, remove all foam

and styrofoam parts from the top and bottom sec-

tions.

Do not wash these parts in the washing machine.

Rubber loops

Plastic cards

NOTE