CeoTronics 2400105 운영 매뉴얼 - 페이지 17

{카테고리_이름} CeoTronics 2400105에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CeoTronics 2400105 20 페이지.

13 Power supply – Battery change

Power is supplied by a Li-Po battery pack or by 3 AAA cells, which are inserted into the device in a

special adapter. Alkaline or NiMH batteries can be used in the adapter.

Batteries and accumulators must not be mixed in the adapter.

A runtime display is only possible when using the Li-Po battery pack.

Depending on the ambient temperature, the headset is used and the intensity of use (transmission /

reception / standby), operating times of up to approx. 16 hours can be achieved with a Li-Po battery

pack and operating times of up to approx. 8 hours can be achieved with NiMH AAA battery cells.

Adapter for 3 AAA cells:

Li-Po accu pack:

Changing the battery/rechargeable batteries - Li-Po battery pack or adapter with 3xAAA cells

Remove the accu pack or adapter from the device. When reinserting,

make sure that the contacts are at the top and inside of the device.

When using the AAA adapter, set the type of battery used in the

Settings menu - NiMH or alkaline.

dok1702-us-07-0221

Article Number

4024001

4024002

Open the battery

compartment by turning

the latches in the

direction of the arrow

17 / 20

Example

accu pack