IKEA IH6362WS0 사용 및 관리 매뉴얼 - 페이지 8
{카테고리_이름} IKEA IH6362WS0에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA IH6362WS0 28 페이지. 30" (76.2cm) and 36" (91.4cm) wall-mount canopy range hood installation instructions and use and care guide
Excessive Weight Hazard
Use two or more people to move and install range hood.
Failure to do so can result in back or other injury.
1=
Hang hood on 2 mounting hooks through the rectangular
cutouts on back of hood.
B
A, Mounting hooks
B. Mounting screws
C. Leveling screws
D. Centerline on wall
2. Level the hood with leveling screws in mounting hooks or
rectangular cutouts, using a level across bottom of hood.
3. Secure hood with 4 screws through remaining 4 holes in hood.
1=
A. Transition
2. Seal connection with duct tape.
::
::
Electrical
Shock Hazard
Disconnect
power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1. Disconnect power.
2. Remove terminal box cover.
3. Remove the knockout in terminal box cover and install the
UL-or CSA-listed W' conduit.
4. Run 3 wires, black, white and green (14AWG) in V2" conduit
from service panel to terminal box.
A
A. Conduit
5. Use twist-on connectors and connect black wires together.
6. Use twist-on connectors and connect white wires together.
Electrical
Shock Hazard
Electrically
ground
blower.
Connect
ground wire to green and yellow ground
wire
in terminal
box.
Failure to do so can result in death or electrical
shock.
7. Use twist-on connectors and connect green or bare wire with
yellow-green wire.
8. Replace terminal box cover.
9o Check all light bulbs to make sure they are secure in their
sockets.
10. Reconnect power.