IKEA IHW6362WM0 설치 지침 및 사용 및 관리 매뉴얼 - 페이지 8

{카테고리_이름} IKEA IHW6362WM0에 대한 설치 지침 및 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA IHW6362WM0 28 페이지. 30" (76 cm), 35 7/16" (90 cm) wall-mount canopy range hood

IKEA IHW6362WM0 설치 지침 및 사용 및 관리 매뉴얼
1=
f" s cl
Hoo£
Excessive Weight Hazard
Use two or more people to move and install
range hood.
Failure to do so can result in back or other injury.
Using 2 or more people, hang range hood on 2 mounting
hooks through the rectangular cutouts on back of hood.
i
i
B
D
B
A. Mounting hooks
B. 5 x 35 mm mounting screws
C. Leveling screws
D. Centerline on wall
2. Level the hood with leveling screws in mounting hooks or
rectangular cutouts, using a level across bottom of hood.
3. Secure hood with 4 screws through remaining 4 holes in
hood.
1=
Fit vent system over transition piece.
A
/
B
Mc <® E
ccl Connect on
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1=
2.
3.
4=
5=
Disconnect
power.
Remove terminal box cover.
Remove the knockout in the terminal box cover and install a
UL listed or CSA approved W' strain relief.
Run 3 wires, black, white and green (14AWG), in W' conduit
from service panel to terminal box. Use caulking to seal
opening.
D
E
F
A. UL listed or CSA approved strain relief
B. Home power supply cable
C. Terminal box
D. Black wires
E. Green (or bare) wire connected
to yellow-green
wire
F. White wires
Use UL listed wire connectors
and connect black wires (D)
together.
A. Vent transition
B. 3.5 x 6.5 mm screw
2. Seal connection with clamps.
8