Ganz ZC-D5212NXA 사용 설명서 - 페이지 4

{카테고리_이름} Ganz ZC-D5212NXA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ganz ZC-D5212NXA 12 페이지. Mini dome camera
Ganz ZC-D5212NXA에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄
Ganz ZC-D5212NXA 사용 설명서

PART NAMES

Exterior
Body cover
Surface mount cover
Video relay cable
Camera body
Accessories
Service monitor cable
Removing and attaching the cover
• Dome cover
To remove : Pull the cover away.
To attach :
Insert the cover and push it gently until you
hear a click.
• Body cover
To remove : Insert a flat-bladed screwdriver into the
groove between the camera body and the
body cover, then twist the screwdriver.
To attach :
Align the corrugations on the camera body
and body cover, then push until you hear a click.
Inner cover
Dome cover
M4 x 20 2 pcs.
Self-tapping screws
Adapter ring
Flat-bladed
screwdriver
Camera body interior
1 Lens
2 Focus/
View angle
adjustment lever
3 Power input
terminal
1 Lens
∞
N : Focus adjustment lever
2
W
T : View angle adjustment lever
Positioning of the lens body angle/focus adjustment lever varies depending on the lens. Please
refer to the above guides for operation marked on the side of the levers while using the product.
3 Power input terminal
4 Menu Operation Switch
5 Video output connector for service monitor
6 Video relay cable
7 Termination resistance switch (with communication function)
8 B/W Fix terminal/Mode Selection terminal
9 RS485 communication terminal (with communication function)
EG-4
4 Menu Operation Switch
5 Video output connector
for service monitor
7 Termination
resistance switch (with
communication function)
8 B/W Fix terminal/Mode
Selection terminal
9 RS485 communication
terminal (with
communication function)
6 Video relay cable