Ganz ZC-DN5212NHAT 사용 설명서 - 페이지 8
{카테고리_이름} Ganz ZC-DN5212NHAT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ganz ZC-DN5212NHAT 12 페이지. Mini dome camera
페이지 인쇄
Attaching the service monitor
Use the service monitor cable to check and adjust camera direction, focus,
and angle on a service monitor.
The service monitor is not supplied with
this unit. Please have one ready.
Adjusting the camera direction
The camera body is set in a tri-axial mounting allowing movement in the
pan, tilt, and rotational planes.
Adjust the direction of the lens so it faces the subject.
Indicates the top
of the camera
Attention
Using the camera in a near-horizontal position will show the camera cover
●
on screen.
Forcibly adjusting the camera to point in directions beyond the limits of
●
the mounting may cause the cable to catch on internal components and
damage the camera.
350º Pan
350º Rotation
180º Tilt
When you have finished adjusting the direction of the lens, tighten the locking
screw with a screwdriver.
EG-8
Locking screw