2M Technology 2MITD 사용자 설명서 - 페이지 6

{카테고리_이름} 2M Technology 2MITD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 2M Technology 2MITD 8 페이지. Thermo detector

Note: need set ID number only when adding optional network(LAN) function.

Installation Note

1. Install device in windless indoor, Cold wind could interfere thermo detection, we need turn up the ambient tem-

perature compensation factor (5 °C each time)

2. Sunshine could interfere thermo detection.

Thermo Detection Instruction

1. Normal use environment temperature: 0°C- 35°C; when using at a temperature of about -10°C, the ambient tem-

perature compensation value needs to be increased each time ( Adjust 5°C), until the error between the measured

value and the forehead gun is within ± 0.3, and then measure. If multiple body temperature measurements occur

Low, you can also use this method to calibrate.

2. Measurement method: forehead temperature measurement or wrist temperature measurement in same mode .

3. The best measurement distance is 1-10cm.

4. Measurement time is 0.5s, please move forehead or wrist after detection to avoid repetitive measurement or

non-responsive situation.

5. Environment could affect the thermo detection, the measurement accuracy is ±0.3°C.

Product Weight

Weight

Working Temperature

Operating Humidity

Power Consumption

External Power Supply

Working Voltage

Temperature Measurement Speed

Temperature Measurement Accuracy

Temperature Measurement Distance

Dimensions

Weight 0.6kg

less than 8W

-10 ~ 45 °C

95%, non-condensing

Power consumption

AC100~240V, 50/60Hz

12V

Less than 1 second

± 0.3°C

1+20 cm

164 x 110 x 32mm (excluding

bracket and power adapter)