Ganz ZC-Y20PH 사용 설명서 - 페이지 16

{카테고리_이름} Ganz ZC-Y20PH에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ganz ZC-Y20PH 20 페이지. Colour cs mount camera

● Enhancement setting screen 2

When you select MANUAL and register its setting, the

[＊] cursor in the indication of "SOFT ーー＋ーー SHARP"

flashes, permitting a level to be varied with the ▲ key

and the ▼ key. Pressing the SET key here for

registration will return the display to the initial screen.

■ Camera ID Title Setting

● Camera ID title setting screen 1

You can use up to 8 alphanumeric characters and symbols to set a camera ID title. The title can be displayed

at one of the following 4 locations on the screen: lower right, lower left, upper left, and upper right.

Move the flashing [→] cursor with the ▲ key and the ▼

key to select either "ON" (display ON) or "OFF" (display

OFF), then press the SET key to register the setting.

When you select OFF and register its setting, the display

returns to the initial screen without displaying the camera

title. When you select ON and register its setting, the

camera ID setting screen 2 is displayed.

● Camera ID title setting screen 2

When no ID title is set, the indication of "＊＊＊＊＊＊＊

＊" is displayed at the lower left of the screen

Move the flashing [→] cursor with the ▲ key and the ▼

key to select the title display position from Lower R,

Lower L, Upper L, and Upper R. Pressing the SET key to

ID title setting screen 3.

ＥＮＨＡＮＣＥＲＮＯＲＭＡＬ

→ＭＡＮＵＡＬ

ＳＯＦＴＳＨＡＲＰ

ーーーー＊ーー＋ーーーーーーー

ＣＡＭＥＲＡＩＤ →ＯＦＦ

ＯＮ

ＣＡＭＥＲＡＩＤＯＦＦ

→ＯＮ

ＬｏｗｅｒＲ

→ＬｏｗｅｒＬ

ＵｐｐｅｒＬ

ＵｐｐｅｒＲ

＊＊＊＊＊＊＊＊