2M Technology 2MTHFR-2M 빠른 매뉴얼 - 페이지 11

{카테고리_이름} 2M Technology 2MTHFR-2M에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 2M Technology 2MTHFR-2M 17 페이지. Thermo detector
2M Technology 2MTHFR-2M에 대해서도 마찬가지입니다: 빠른 매뉴얼 (19 페이지), 사용자 설명서 (8 페이지)

페이지 인쇄

FAQs

Failure/

Symptom

What

should I do

if some

people's

temperatu-

res cannot

be taken?

What

should I do

if the

tempe-

rature

measured

by the

device is

inaccurate

1. Check whether the measurement distance is adequate. The

recommended measurement distance is 20–30cm for single

point series and 50–70cm for matrix series.

2. Check whether the people get close to occupy the human shape

on the screen and aim the forehead center at the red circle.

3. Check whether the forehead is covered by fringes, hats,

sunglasses, or other objects when the forehead temperature

needs to be taken. If so, remove such objects 0.5 to 1 minute

before the temperature can be taken.

4. Check whether the body surface temperature is too low. If a

person comes from an outdoor low-temperature environment to

the measurement area, the person needs to stay in this area for

5 min before the temperature is taken.

1. The device requires preheating after power-on. It enters the

optimal temperature measurement state 15 minutes later.

2. Check whether the people get close to occupy the human shape on

the screen and aim the forehead center at the red circle.

3. Check whether the forehead is covered by fringes, hats,

sunglasses, or other objects when the forehead temperature

needs to be taken. If so, remove such objects 0.5 to 1 minute

before the temperature can be taken.

4. Check whether the device is used in an environment with low

temperature, high temperature, or strong wind. If yes, deploy

the device in an indoor windless environment with the

temperature of 10°C to 45°C.

Solution