Avantco 178SSUC27FHC 사용자 설명서 - 페이지 7

{카테고리_이름} Avantco 178SSUC27FHC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 178SSUC27FHC 10 페이지. Undercounter & worktop refrigerators & freezers
Avantco 178SSUC27FHC에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지)

페이지 인쇄

User Manual

Undercounter & Worktop Refrigerators & Freezers

Controller

Loading Product

Before loading shelves, please be sure that all shelf clips are completely fastened in their correct locations.

It is important that all shelves rest completely level before stocking your cabinet with product. In order to

maintain correct air flow inside the unit, please be sure to leave 2-4 inches of space between the back wall

and stored product. Blocking the evaporator fans will result in a warmer cabinet temperature, and ultimately,

compressor failure.

Defrost System

Refrigerator coils are kept below the freezing point (32 degrees Fahrenheit). During compressor

downtime, the evaporator fan continues to circulate air through the evaporator coil. This air circulation raises

the coil temperature above the freezing point, melting any accumulated frost. Run-off water is drained into

the evaporator pan and evaporated. Freezer coils are defrosted electronically. Automatic defrost timers

automatically initiate at pre-set intervals and for a pre-determined duration.

Running a Manual Defrost Cycle

This unit is pre-programmed to run automatic defrost cycles at preset intervals. However, if you would like

to run a manual defrost cycle at any time, press the defrost button (snowflake symbol and down arrow) for

approximately 3 seconds. Repeat to stop the defrost cycle.