IKEA UTDRAG 매뉴얼 - 페이지 8

{카테고리_이름} IKEA UTDRAG에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA UTDRAG 20 페이지. Range hood
IKEA UTDRAG에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 사용자 설명서 (16 페이지), 조립 지침 매뉴얼 (36 페이지), 사용자 설명서 (44 페이지), 매뉴얼 (41 페이지), 매뉴얼 (33 페이지)

페이지 인쇄

ENGLISH

• For Class I appliances, check that the domestic power supply

guarantees adequate earthing.

• Connect the extractor to the exhaust flue through a pipe of

minimum diameter 120 mm. The route of the flue must be as

short as possible.

• Do not connect the extractor hood to exhaust ducts carrying

combustion fumes (boilers, fireplaces, etc.).

• If the extractor is used in conjunction with non-electrical

appliances (e.g. gas burning appliances), a sufficient degree

of aeration must be guaranteed in the room in order to

prevent the backflow of exhaust gas. When the cooker hood

is used in conjunction with appliances supplied with energy

other than electric, the negative pressure in the room must

not exceed 0,04 mbar to prevent fumes being drawn back

into the room by the cooker hood.

• The air must not be discharged into a flue that is used for

exhausting fumes from appliances burning gas or other

fuels.

• If the supply cord is damaged, it must be replaced from the

manufacturer or its service agent.

• Connect the plug to a socket complying with current

regulations, located in an accessible place.

• With regards to the technical and safety measures to be

adopted for fume discharging it is importat to closely follow

the regulations provided by the local authorities.

WARNING: Before installing the Hood, remove the

protective films.

• Use only screws and small parts in support of the hood.

WARNING: Failure to install the screws or fixing device in

accordance with these instructions may result in electrical

hazards.

• Connect the hood to the power net by using a bipolar switch

having a contact gap of at least 3 mm.