Ganz ZN-NH11VP(N)E 빠른 사용 설명서
{카테고리_이름} Ganz ZN-NH11VP(N)E에 대한 빠른 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ganz ZN-NH11VP(N)E 6 페이지.
페이지 인쇄
ZN-Y11VP(N)E/ZN-NH11VP(N)E/ZN-NHW11VP(N)E
Quick User Guide
This manual has been designed to guide you through basic settings of your IP devices, such as installation and
configuration for using them.
Step1. Connect cables to IP device
Connect each cable to the device. To see the correct positions of all connectors, refer to the following image
below.
* Models herein and their
appearance are subject to change
without any prior notice.
RESET Button
LAN
Step2. Set up network environment
The default IP address of your IP device is 192.168.XXX.XXX. You can find the available IP address from the
MAC address of your device. Please make sure the device and your PC are on the same network segment
before running the installation. If the network segment was different between your PC and the device, change
your PC's settings as below.
IP address : 192.168.xxx.xxx
Subnet mask: 255.255.0.0
EC11 Ver1.2
LOOP OUT
RS-485 DO DI
- +
C 1 C 1
ETHERNET
CCW
CCW
CW
CW
SET SCREW
Set Screw
RESET
AUDIO
+
+ ‐
Out In
RED
Micro SD
(For IRIS LENS)
Make sure the polarity is correct. Incorrect
!
connection may cause malfunction or
Caution
damage to the IP device.
1
‐
DC 12V
Power Adaptor Connector (DC 12V)