HIKVISION TURBO HD 4K Series 사용자 설명서 - 페이지 6
{카테고리_이름} HIKVISION TURBO HD 4K Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD 4K Series 12 페이지. Turret & dome camera
HIKVISION TURBO HD 4K Series에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지)
페이지 인쇄
4. Secure the mounting base to the ceiling with the
supplied screws.
Figure 2-3 Fix the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Secure the camera on the mounting base.
7. Connect the corresponding cables, such as power
cord, and video cable.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
[0° to 360°]
1). Hold the camera body and rotate the enclosure
to adjust the pan position [0°to 360°].
2). Move the camera body up and down to adjust
the tilt position [0°to 75°].
3). Rotate the camera body to adjust the rotation
position [0°to 360°].
2.2 Ceiling Mounting of Type II Camera
Steps:
1. Paste the dill template to the ceiling.
2. Drill the screw holes, and cable hole (optional) in
the ceiling according to the drill template.
Available from A1 Security Cameras
w.a1securitycameras.com email: sales@a1securitycamera
Fixing Screw
Figure 2-4 Secure the Camera
Tilt Position
[0°to75°]
Figure 2-5 3-axis Adjustment
Expansion Bolts
Rotation Position
[0° to 360°]