HIKVISION TURBO HD 5 MP 사용자 설명서 - 페이지 6

{카테고리_이름} HIKVISION TURBO HD 5 MP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD 5 MP 15 페이지. Bullet & turret camera

Figure 2-2 Fix the Camera to the Ceiling

Note:

In the supplied screw package, both self-tapping



screws, and expansion blots are contained.

If the ceiling/wall is cement, expansion blots are



required to fix the camera. If the ceiling/wall is

wooden, self-tapping screws are required.

5. Connect the corresponding power cord, and video

cable.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the surveillance angle.

1) Loosen the No.1 adjusting screw to adjust the

pan position [0° to 360°].

2) Tighten the No.1 adjusting screw.

3) Loosen the No.2 adjusting screw to adjust the

tilting position [0° to 90°].

4) Tighten the No. 2 adjusting screw.

5) Loosen the No.3 adjusting screw to adjust the

rotation position [0° to 360°].

6) Tighten the No.3 adjusting screw.

0° to 360°

0° to 90°

2.1.2 Ceiling/Wall Mounting with

Note:

You need to purchase a junction box separately if you

adopt the mounting with a junction box

Steps:

1. Paste the drill template on the ceiling/wall.

2. Drill screw holes and the cable hole in the

ceiling/wall according to the holes of the drill

template.

3. Take apart the junction box, and align the screw

holes of the bullet camera with those on the

Junction box' cover.

4. Fix the camera on the junction box's cover.

0° to 360°

Figure 2-3 3-axis Adjustment

Junction

Box