HIKVISION TURBO HD C5T Series 사용자 설명서 - 페이지 7
{카테고리_이름} HIKVISION TURBO HD C5T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD C5T Series 16 페이지. Dome & turret camera
HIKVISION TURBO HD C5T Series에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)
페이지 인쇄
5. Attach the junction box's body to the ceiling/wall by
aligning the screw holes of the junction box.
6. Secure the junction box's body with supplied screws
on the ceiling/wall.
Figure 2-6 Secure the Box's Body to the Ceiling
7. Route the cables through the cable hole, or the side
opening of the junction box.
8. Combine the junction box cover with its body.
Figure 2-7 Install the Junction Box Cover back to its
9. Refer to step 5 to 6 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
Note:
Drill the cable hole in the center of the drill template,
when adopting ceiling outlet to route the cable.
3. Route the cables through the cable hole (optional)
or the side opening.
4. Install the camera to the ceiling with supplied
screws.
Body
Figure 2-8 Drill Template