Cequent 60368 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Cequent 60368에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cequent 60368 12 페이지. 2015-current audi a3

1. Feed the coiled end of the pull wire through rearward hole and out the access hole.

Attach spacer and carriage bolt onto pull wire and feed the fasteners into location

through the hole. Leave pull wires attached. Repeat the same process on the both

frame rails. Note: it may be easier to install the carriage bolt head first. Repeat with

the forward holes. Both frame rails.

3. Feed conical washer over pull wire, using the washer to hold the bolt

in place remove the pull wires and attach the hex nut. Tighten to

hold hitch in place, repeat with all fasteners.

Printed in Mexico

2. Raise the hitch over the exhaust pipes into position, feed the

pull wires through the slots of the hitch brackets.

4. Center hitch on the vehicle.

5. Tighten all 7/16-14 GR5 fasteners with torque wrench to 50 Lb.-Ft.

(68 N*M)

Sheet 4 of 12

24930NP

Proper torque is needed

to keep the hitch secure

to the vehicle when

towing.

9-29-15

Rev. B