Cequent 76112 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Cequent 76112에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cequent 76112 18 페이지. 2011-current toyota sienna

1. Mark centerline appearance panel: Mark centerline of

appearance with marker or tape.

3. Lower exhaust: Lower the exhaust by detaching it from the rubber isolator.

Spraying a lubricant or soapy water on the metal hanger rod and the rubber

isolator helps removal

2. Remove appearance panel: Remove 5 Philips screw, 9 plastic rivet (Rivets are released by first

pulling out center post of rivet, then remove remaining post), 4 plastic screws with large screwdriver

(pull on panel for ease of removal).

Printed in Mexico

4. Remove plug and tape: Remove the rubber plugs (1 each side) and if present

remove tape covering the weld nuts (3 each side). Run bolts from fastener kit into

weld nuts to confirm no interference.

Sheet 4 of 18

76112NP

11-10-16

Rev. B