HIKVISION TURBO HD DS-2CE16F1T-IT 사용자 설명서 - 페이지 6

{카테고리_이름} HIKVISION TURBO HD DS-2CE16F1T-IT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE16F1T-IT 10 페이지.

Figure 2-5 Fix the Camera to the Ceiling/Wall

6. Refer to step 5 of 2.1.1 to adjust the camera to get

an optimum angle.

2.2 Installation of Type II Camera

2.2.1 Ceiling/Wall Mounting without Gang Box

Steps:

1. Attach the drill template (supplied) to the place

where you want to fix the camera, and then drill the

screw holes and the cable hole in the ceiling/wall

according to the drill template.

2. Route the cables through the cable hole.

3. Secure the camera to the ceiling with the supplied

Screws.

Figure 2-6 Fix the Camera to the Ceiling/Wall

4. Connect the corresponding cables.

5. Adjust the camera according to Figure 2-7 to get an

optimum angle.

1). Loosen the P screw to adjust the pan direction

[0°~360°]. Tighten the screw after completing

the adjustment.

2). Loosen the T screw to adjust the tilt direction

[0°~180°]. Tighten the screw after completing

the adjustment.

3). Loosen the R screw and rotate the camera

[0°~360°] to adjust the lens to the surveillance

angle. Tighten the screw after completing the

adjustment.

Rotation Position Range

[0°-360°]

Figure 2-7 3-axis Adjustment

Pan Position Range

[0°-360°]

P Screw

Tilt Position Range

[0°-180°]

T Screw

R Screw