HIKVISION TURBO HD DS-2CE16U7T-IT3F 사용자 설명서 - 페이지 7

{카테고리_이름} HIKVISION TURBO HD DS-2CE16U7T-IT3F에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE16U7T-IT3F 15 페이지.

Figure 2-6 Secure the Junction Box to the Wall/Ceiling

7. Route the cables through the bottom cable hole, or

the side cable hole of the junction box.

8. Combine the junction box cover with its body.

Figure 2-7 Combine the Junction Box Cover back to its

9. Repeat the step 5 and 6 of 2.1.1 Ceiling/Wall

Mounting without Junction Box to complete the

installation.

2.2 Installation of Type II Camera

2.2.1 Ceiling/Wall Mounting without Junction Box

Steps:

1. Paste the drill template to the place where you want

to install the camera.

2. Drill the holes according to the drill template.

Note:

Drill the cable hole in the center of the drill template,

when adopting ceiling outlet to route the cable.

3. Route the cables through the cable hole.

4. Install the camera to the ceiling/wall with supplied

screws.

Junction Box

Body

Figure 2-8 Drill Template

Body