HIKVISION TURBO HD DS-2CE56D0T-IT3F 사용자 설명서 - 페이지 10
{카테고리_이름} HIKVISION TURBO HD DS-2CE56D0T-IT3F에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56D0T-IT3F 10 페이지. Tvi bullet & turret & dome
페이지 인쇄
3. Attach the mounting base to the ceiling and secure
them with supplied screws
Figure 2. 11 Attach the Mounting Base to the Ceiling
4. Route the cables through the cable hole (optional),
or the side opening.
5. Align the camera with the mounting base, secure
the camera with the mounting base, and fix the trim
ring to the camera.
6. Connect the corresponding cables, such as power
cord, and video cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure
below to get an optimum angle.
1). Hold the camera body and rotate the enclosure
to adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust
the tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
Tilt Positioning Range：
Figure 2. 12 3-axis Adjustment
Figure 2. 10 Drill Template
0°to 75°
Rotation Positioning Range：
2-Φ4.5
0°to 360°
Φ98.0
Pan Positioning Range：
0°to 360°