HIKVISION TURBO HD DS-2CE56D8T-(A)VPIT3Z(E) 사용자 설명서 - 페이지 7

{카테고리_이름} HIKVISION TURBO HD DS-2CE56D8T-(A)VPIT3Z(E)에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56D8T-(A)VPIT3Z(E) 15 페이지. D8t series dome camera

페이지 인쇄

1. Paste the dill template to the ceiling.

2. Drill the screw holes and cable hole (optional) in the

ceiling according to the drill template.

Note:

Cable hole is required, when adopting the ceiling

outlet to route cables.

3. Loosen the set screws with a hex wrench (supplied)

to remove the bubble.

4. Fix the mounting base on the ceiling with supplied

screws.

5. Route the cables through the cable hole, or the side

opening.

6. Connect the corresponding cables, such as power

cord, and network cable.

7. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle

Figure 2-5 Drill Template

Figure 2-6 Remove the Bubble

Figure 2-7 Fix the Mounting Base