HIKVISION Turbo HD DS-2CE56D8T-ITZE 사용자 설명서 - 페이지 9
{카테고리_이름} HIKVISION Turbo HD DS-2CE56D8T-ITZE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION Turbo HD DS-2CE56D8T-ITZE 17 페이지.
페이지 인쇄
Figure 2-10 Install the Mounting Base to Ceiling
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and video cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Rotation Position
0° to 355°
1). Loosen the tilt adjusting screw to adjust the tilt
position [0° to 75°].
2). Hold the black liner to adjust the pan position [0°
to 355°].
3). Hold the camera body to adjust the rotation
position [0° to 355°].
8. Install the bubble back.
Figure 2-12 Install the Bubble Back
9. Tighten screws to finish the installation.
Figure 2-11 3-axis Adjustment
Figure 2-13 Finish the Installation
Pan Position
0° to 355°
T Screw
Tilt Position
0° to 75°