HIKVISION Turbo HD DS-2CE56D8T-VPIT3ZE 사용자 설명서 - 페이지 11
{카테고리_이름} HIKVISION Turbo HD DS-2CE56D8T-VPIT3ZE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION Turbo HD DS-2CE56D8T-VPIT3ZE 17 페이지.
페이지 인쇄
7. Connect the corresponding cables.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
1). Loosen the tilt adjusting screw to adjust the tilt
position [0° to 75°].
2). Loosen the pan adjusting screw to adjust the
pan position [0° to 340°].
3). Loosen the rotation adjusting screw to adjust
the rotation position [0° to 355°].
9. Install the bubble back to the camera.
Figure 2-19 Install the Bubble Back
10. Finish the installation.
Figure 2-17 Secure the camera
Pan Position
0° to 340°
Tilt Position
0° to 75°
Rotation Position
0° to 355°
Figure 2-18 3-Axis Adjustment
Figure 2-20 Finish the Installation