HIKVISION TURBO HD DS-2CE56H0T-ITME 사용자 설명서 - 페이지 9
{카테고리_이름} HIKVISION TURBO HD DS-2CE56H0T-ITME에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56H0T-ITME 16 페이지. Turbo hd turret & dome camera
페이지 인쇄
8. Connect the corresponding cables, such as power
cord, and video cable.
9. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle.
Tilt Position
[0°to75°]
1). Hold the camera body and rotate the enclosure to
adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
2.3 Installation of Type I and Type II Camera
2.3.1 Ceiling/Wall Mounting with Junction Box
Steps:
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole (optional) in the
ceiling/wall according to the holes of the drill
template.
Figure 2-13 Secure the Camera
Figure 2-14 3-axis Adjustment
Pan Position
[0° to 360°]
Rotation Position
[0° to 360°]