Green Power KP-E1304 사용 - 페이지 5
{카테고리_이름} Green Power KP-E1304에 대한 사용을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Power KP-E1304 13 페이지.
Green Power KP-E1304에 대해서도 마찬가지입니다: 운영 매뉴얼 (20 페이지)
Disassembly for KP-E1304 Standard type
Turn the Lock Lever counterclockwise.
Separate the Feeding Chute Cover from
the Body by lifting it upward.
Remove the Screen from the
Body.
10
GreenPower
KEMPO JuiceExtractor
Slowly turn the Feeding Chute Handle by
180 degrees in the counterclockwise
direction.
Remove the Pulp Discharging Part from
the Body.
Remove the Clean Gear (Twin gear)
from the Body.
After use, remove the adjusting knob and clean the
interior of the product by pouring a glass of water
slowly into the extractor in its normal operation
state.
1. Remove the water
completely, being careful not to
introduce any water content in
the body and display part.
(Never soak in or spray water to
the Body ? Electric/Electronics
device protection)
2.When cleaning the parts, do
not boil the parts nor use
Do the reverse rotation when disassembling (For 5~10 sec.)
chemical products like chlorine
bleach, thinner, and benzene (It
causes deterioration and
discoloration of the product)
After disassembly, soak the parts and clean them
completely using the cleaning brush.
How to clean
Unplug and disassemble the extractor.
Disassemble the parts according to the instruction shown in Pg. 10
After cleaning, dry the parts in a well-ventilated
place.
11
GreenPower
KEMPO JuiceExtractor