HIKVISION TURBO HD DS-2CE56H0T-ITZE 사용자 설명서 - 페이지 11
{카테고리_이름} HIKVISION TURBO HD DS-2CE56H0T-ITZE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56H0T-ITZE 17 페이지.
페이지 인쇄
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and video cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
8. Fit the bubble back to the camera.
Figure 2-15 Fit the Black Liner Back
9. Tighten the screws on the bubble of the dome
camera to finish the installation.
Tilt Position
0° to 75°
Figure 2-14 3-Axis Adjustment
Figure 2-16 Finish Installation
Pan Position
0° to 355°
Rotation Position
0° to 355°