Green Power KP-E1305 사용 - 페이지 4

{카테고리_이름} Green Power KP-E1305에 대한 사용을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Power KP-E1305 13 페이지.

페이지 인쇄

Assembly for KP-E1304 Standard type

It is very important to make sure that the

Clean Gears are completely aligned.

Ensure the correct placement of the 1st

gear point between the 2nd gear points

as shown in the figure to assemble the

part into the main body.

There should not be any gap between the

body and gears after the gear application,

and the gears should

be placed horizontally.

Align the projected part of the knob and

the dented rail of the Pulp Discharging Part

for their application to the body. Turn those

parts to the right for locking up.

GreenPower

KEMPO JuiceExtractor

It is very important to make sure that

the Clean Gears are completely

aligned. Ensure the correct placement

of the 1st gear point between the 2nd

gear points as shown in the figure to

assemble the part into the main body.

Place the screen closely towards the body

and then apply.

The failure of assembly affects the pulp

discharge as the operation of the knob

spring would be obstructed. Also, it may

result into the damage of the Pulp

Discharging Part (Use the knob properly

depending on the ingredients to be used).

Assembly for KP-E1304 Standard type

Completely attach the Pulp Discharging

There should be a gap as shown in the

figure after the screen application is

Part to the screen and place it.

completed.

Press the inlet lid downward and turn the

Turn the lock lever clockwise.

lever clockwise to fasten.

Place the stainless-steel container and fresh juice

cup as shown in the figure and press the power

switch upward to operate the extractor. Insert

ingredients through the inlet and press them using

the wooden pusher.

GreenPower

KEMPO JuiceExtractor