HIKVISION TURBO HD DS-2CE56H0T-VPITE 사용자 설명서 - 페이지 7
{카테고리_이름} HIKVISION TURBO HD DS-2CE56H0T-VPITE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56H0T-VPITE 16 페이지. Turbo hd turret & dome camera
페이지 인쇄
2). Move the camera body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
2.1.2 Mounting with Inclined Ceiling Mount
Before you start:
You need to purchase an inclined ceiling mount first.
Steps:
1. Paste the drill template (supplied) to the place where
you want to install the camera.
2. Drill screw holes, and the cable hole on the
ceiling/wall according to the supplied drill template.
3. Disassemble the inclined ceiling mount by the screw
driver.
4. Install the turret camera's mounting base on the
inclined ceiling mount cover with three PM4 screws.
Figure 2-7 Install Turret Camera's Mounting Base
5. Install the inclined ceiling mount's body on the
ceiling/wall with four PA4 × 25 screws, as shown in
Figure 2-8.
Figure 2-8 Fix the Inclined Ceiling Mount Body
6. Combine inclined ceiling mount's cover with its body
with supplied screws.
7. Repeat steps 6 to 9 of the 2.1.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
Figure 2-9 Fix the Camera to the Inclined Ceiling Mount
Figure 2-6 The Drill Template
Inclined Ceiling
Mount