HIKVISION TURBO HD DS-2CE56H5T-ITMEB 사용자 설명서 - 페이지 7
{카테고리_이름} HIKVISION TURBO HD DS-2CE56H5T-ITMEB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56H5T-ITMEB 17 페이지. Turret & dome camera
페이지 인쇄
2.1.2 Mounting with Inclined Base
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. Drill screw holes, and the cable hole on the
ceiling/wall according to the supplied drill template.
3. Disassemble the inclined base by the screw driver.
4. Install the turret camera's mounting base on the
inclined base cover with three PM4 screws.
Figure 2-7 Install Turret Camera's Mounting Base
5. Install the inclined base's body on the ceiling/wall
with four PA4 × 25 screws, as shown in Figure 2-8.
Figure 2-8 Fix the Inclined Base Body
6. Combine inclined base's cover with its body with
supplied screws.
7. Repeat steps 6 to 9 of the 2.1.1 Ceiling/Wall
Mounting without Junction Box to complete the
installation.
Figure 2-9 Fix the Camera to the Inclined Base
2.2 Installation of Type II Camera
Before you start:
Both wall mounting and ceiling mounting are suitable
for the turret camera. Ceiling mounting will be taken as
an example in this section. You can take steps of ceiling
mounting as the reference, when adopting the wall
mounting.
Steps:
Figure 2-6 The Drill Template