HIKVISION TURBO HD DS-2CE56H5T-VPITEB 사용자 설명서 - 페이지 10
{카테고리_이름} HIKVISION TURBO HD DS-2CE56H5T-VPITEB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56H5T-VPITEB 17 페이지. Turret & dome camera
페이지 인쇄
Steps:
1.
Drill four screw holes in the wall according to the
holes of the bracket.
2. Install the bracket to the wall by aligning the four
screw holes of the bracket with expansion screws on
the wall.
3. Secure the bracket with four hex nuts and washers.
Type I Camera
4. Install the mounting base of the turret camera to
the wall mounting bracket, and secure them with
supplied screws.
Figure 2-18 Install the Mounting Base to the Bracket
5. Route the cables through the bracket.
6. Repeat steps 7 to 9 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
2.4 Ceiling Mounting of Type III Camera
Steps:
1. Paste the dill template to the ceiling.
2. Drill the screw holes and cable hole (optional) in the
ceiling according to the drill template.
Note:
Cable hole is required, when adopting the ceiling
outlet to route cables.
3. Loosen the set screws with a hex wrench (supplied)
to remove the bubble.
Figure 2-17 Install the Bracket
Hole A: for cables routed through the ceiling
screw hole 1: for Mounting Base
Figure 2-19 Drill Template