Decor Star PL-022-SS 설치 매뉴얼 - 페이지 7
{카테고리_이름} Decor Star PL-022-SS에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Decor Star PL-022-SS 9 페이지.
Installation
Decor Star
800mm
31.5"
1"
1. Mark the positions of the 2 brackets on the wall
and set a side the panel. (NOTE: The distance
between the two brackets should be 800mm or
31.5")
2. Using a drill with a tile bit, drill the hole slowly
into the tile. Do not drill into any piping or wiring in
the wall. Insert the anchors into the wall. (NOTE:
Before installing the wall anchors, use a small
piece of painters tape or masking tape over the
drill area. This will prevent damages to the tile)
3. Secure the mounting brackets to the wall.
7
PL-022-SS Rev. A2 012016