HIKVISION TURBO HD H1T Series 사용자 설명서 - 페이지 7

{카테고리_이름} HIKVISION TURBO HD H1T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD H1T Series 15 페이지. Bullet camera
HIKVISION TURBO HD H1T Series에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지), 사용자 설명서 (15 페이지)

페이지 인쇄
HIKVISION TURBO HD H1T Series 사용자 설명서
Figure 2-4 Fix the Camera with the Gang Box
5. Attach the junction box's body to the ceiling/wall by
aligning the screw holes of the junction box.
6. Secure the junction box's body with supplied screws
on the ceiling/wall.
Figure 2-5 Fix the Camera to the Ceiling
7. Route the cables through the cable hole, or the side
opening of the junction box.
8. Combine the junction box cover with its body.
Figure 2-6 Fix the Junction Box Cover back to its Body
9. Refer to step 6 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the place
where you want to fix the camera,
2. Drill the screw holes according to the drill template
and the cable hole (optional) in the ceiling/wall.
Note:
Drill the cable hole when adopting the ceiling outlet to
route the cable.
3. Loosen screws to remove the clip plate and take out
the main body.
Screw
Figure 2-7 Drill Template