HIKVISION TURBO HD H1T Series 사용자 설명서 - 페이지 6
{카테고리_이름} HIKVISION TURBO HD H1T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD H1T Series 15 페이지. Bullet camera
HIKVISION TURBO HD H1T Series에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지), 사용자 설명서 (15 페이지)
페이지 인쇄
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid the damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the
bracket.
If the wall is cement, insert expansion bolts before
you install the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Type I Camera
2.1.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera
2. Drill the screw holes and the cable hole (optional) in
the ceiling/wall according to the drill template.
Note:
Drill the cable hole, when adopting the ceiling outlet to
route the cable.
3. Attach the bracket to the ceiling/wall and secure the
camera with supplied screws.
Figure 2-2 Fix the Camera to the Ceiling
Note:
In the supplied screw package, both self-tapping
screws, and expansion blots are contained.
If the ceiling/wall is cement, expansion blots are
required to fix the camera. If the ceiling/wall is
wooden, self-tapping screws are required.
4. Route the cables through the cable hole, or the side
opening.
5. Connect the corresponding power cord, and video
cable.
6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Cable
Screw
Hole
Hole
Side Opening
Figure 2-1 Drill Template
Adjusting Screws
Screw
Hole
Screw
Hole
Template
Fixing Screw