HIKVISION TURBO HD H8T Series 사용자 설명서 - 페이지 4
{카테고리_이름} HIKVISION TURBO HD H8T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD H8T Series 17 페이지. Turbo hd dome camera
HIKVISION TURBO HD H8T Series에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (15 페이지)
페이지 인쇄
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Mark Description
Mark
1 Introduction
1.1 Product Features
The main features are as follows:
High performance CMOS sensor
IR cut filter with auto switch
OSD menu with configurable parameters
Auto white balance
Internal synchronization
SMART IR mode
4 in 1 video output (switchable TVI/AHD/CVI/CVBS)
3-axis adjustment
1.2 Overview
This manual applies to three types of turret cameras, and
one type of dome camera.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
Enclosure
Main
Body
Mounting
Base
Figure 1-1 Overview of Type I Camera
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
1.2.2 Overview of Type II Camera
Figure 1-2 Overview of Type III Camera
Table 0-1 Mark Description
Description
DC Voltage
Mounting
Base
Clip Plate
Enclosure
Main Body
Switch
Button
Power Cord
IN
DC 12 V
Video Cable
Switch
Button
Power Cord
IN
DC 12 V
Video
Cable