HIKVISION TURBO HD H8T Series 사용자 설명서 - 페이지 5
{카테고리_이름} HIKVISION TURBO HD H8T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD H8T Series 17 페이지. Turbo hd dome camera
HIKVISION TURBO HD H8T Series에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (15 페이지)
페이지 인쇄
1 Introduction
1.1 Product Features
The main features are as follows:
High performance CMOS sensor
IR cut filter with auto switch
OSD menu with configurable parameters
Auto white balance
Internal synchronization
SMART IR mode
4 in 1 video output (switchable TVI/AHD/CVI/CVBS)
3-axis adjustment
1.2 Overview
This manual applies to two types of bullet cameras.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
Figure 1-1 Overview of Type I Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
1.2.2 Overview of Type II Camera
Figure 1-2 Overview of Type II Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
2 Installation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid the damage.
Bracket
Main Body
Lens
Bracket
Main Body
Lens
Switch Button
IN
DC12V
Video Cable
Switch Button
Power Cord
I N
D C1 2V
Video Cable
Power
Cord