HIKVISION TURBO HD TVI DS-2CE16D0T-IRE 사용자 설명서 - 페이지 6
{카테고리_이름} HIKVISION TURBO HD TVI DS-2CE16D0T-IRE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD TVI DS-2CE16D0T-IRE 17 페이지. Turbo hd tvi bullet & turret camera
HIKVISION TURBO HD TVI DS-2CE16D0T-IRE에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)
페이지 인쇄
1.2.4 Type IV Camera Overview
2.1
Installation Preparation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the
mounting bracket.
If the wall is cement, insert expansion bolts before
installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.2
Installation of Type I Camera
Before you start:
Both wall mounting and ceiling mounting are suitable
for the bullet camera. Ceiling mounting will be taken as
an example in this section. You can take the steps of
ceiling mounting as a reference, when adopting the wall
mounting.
Steps:
1. Paste the dill template to the ceiling.
2. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
Clip Plate
Mounting Base
Trim Ring
Enclosure
Figure 1. 4 Type IV Camera
Installation
47.6
Figure 2. 1 Drill Template
Main Body
IN
DC 12 V
Unit： mm
Video Cable
Power Cord