HIKVISION TURBO HD TVI DS-2CE16D0T-IRPE 사용자 설명서 - 페이지 10
{카테고리_이름} HIKVISION TURBO HD TVI DS-2CE16D0T-IRPE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD TVI DS-2CE16D0T-IRPE 15 페이지. Turbo hd tvi bullet & turret camera
HIKVISION TURBO HD TVI DS-2CE16D0T-IRPE에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)
페이지 인쇄
Figure 2. 9 Attach the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall, expansion bolts are required to fix
the camera. For wooden wall, self-tapping screws
are required.
5. Route the cables through the cable hole (optional),
or the side opening.
6. Align the camera with the mounting base, and
tighten the screws to secure the camera with the
mounting base.
Figure 2. 10 Secure the Camera with Mounting Base
7. Connect the corresponding cables, such as power
cord, and video cable.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position Range
[0° to 360°]
Tilt Position Range
[0°to 75°]
Figure 2. 11 3-axis Adjustment
1). Hold the camera body and rotate the enclosure
to adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust
the tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
Purpose:
Call the menu by clicking button
interface, or call the preset No.95.
Steps:
1. Connect the camera with the TVI DVR, and the
monitor, shown as the figure 3-1.
Camera
Menu Description
Figure 3. 1 Connection
Rotation Position Range
[0°to 360°]
on the PTZ Control
TVI DVR
Monitor