KitchenAid KD-27A SERIES 설치 지침 매뉴얼 - 페이지 5
{카테고리_이름} KitchenAid KD-27A SERIES에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KD-27A SERIES 16 페이지.
1
CHOOSING THE LOCA T/ON
For easy access to plumbing,
it is most convenient
to have your dishwasher
located near the kitchen sink.
Any built-in dishwasher
must be fully enclosed on the top, both sides, and the back. Therefore, the cabinet space
below your kitchen counter is probably the best location. If the dishwasher
is being installed at the end of a cabinet
or free standing then side panels and a wood top can be purchased from your KitchenAid
dealer to enclose the
dishwasher.
The cabinet opening (Fig. 1) should be square with dimensions
as follows: Height -
3311/16" to 35"; Width -
24" minimum; Depth - 23X"
minimum. If the dishwasher
height of 3311/r6 is too high, it may be reduced to 337/16"
by removing the leveling feet. If side panels are used, cabinet height should be 34%" minimum to 35" maximum
using the adjusting
legs.
I-
7
':O
D.
'0
.D
! 'a
0'
1
6
1 ,
,
-'C
il
.
6 _I
IL
'_
4
DISHWASHER
I
COUNTERTOP
DOOR IN
OPEN POSITION
-
Clearance
for door
opening
Fig.
1
Fig.
2
If the dishwasher
is installed
in a corner, there must be adequate clearance to open the door (Fig. 2).
-
CAUTION
-
To protect against possible
rupture
of the fill valve, water lines leading to the dishwasher,
as well as water
lines in the dishwasher
MUST be protected
against freezing.
Such ruptures
are not covered by the warranty.
-5-